MANUAL DE UTILIZARE
Cod: FAN-STAND-CHILLY-WL
ENGLISH
Thank you for choosing a WELL product. Please read carefully the following instructions and keep them within reach in order to avoid damage due to incorrect use.
Please pay particular attention to the safety information.
SPECIFICATIONS:
Diameter: 40 cm
Power: 45W
Voltage: 220-240V
Frequency: 50/60 Hz
3 speed motor: 950RPM- 1100RPM- 1250RPM
Color: white
Cross base: 60* 60 cm
Height: 1.1 M- 1.3 M adjustable
Oscillation: 90 degree
Noisy level: : <65 dB
Mesh grill
INSTRUCTION FOR ASSEMBLY
.
1.
Be sure to shut off electric supply at main switch or circuit breaker before installation.
2.
Secure lower pipe with pipe support to the hub of cross base with screws provided.
3.
Extend upper pipe, insert the pipe connector through upper pipe onto lower pipe and tighten.
4.
Attach the motor with switch compartment onto the upper pipe. Ensure the switch compartment is pushed fully onto the upper pipe and secured with the screw provided.
5.
Loosen guard mounting nut from the motor housing.
6.
Position back guard firmly to motor housing and then fasten by turning guard mounting nut clockwise tightly.
7.
Push the blade along motor shaft and fasten firmly with the mounting nut..
8.
Hang the front guard to back guard with the position fixer provided at the rim of guard, and then fix together with clips provided. The guard bottom nut & bolt must be fitted to ensure secure fitting.