background image

Indoor

Daily Timer

TM77DHB

Questions?, ¿Preguntas? 201.661.9944

 

©2010 AmerTac™

250 Boulder Drive

Breinigsville, PA 18031

www.amertac.com

Made in China

Fabriqué en Chine/Hecho en China

I09-0030-A

Instruction Manual & Warranty

Setting On/Off Periods

Timer can set up to 48 On/Off commands a day. Using your

 

finger, pen or screwdriver, pull up all pins that correspond to

 

desired “Off” time. For desired “On” time, make sure pins

 

are pushed down.
Each pin represents 30 minutes: 2 pins = 1 hour.

Setting Time

Turn dial clockwise until triangular pointer is pointing at actual

 

time. Be sure switch on top of unit is set to TIMER ON.

Connection

Once desired On/Off times and actual time are set, plug timer

 

into wall outlet, and plug appliance(s) into timer. Be sure wall

 

outlet and appliance are turned on. Timer will start to operate,

 

turning appliance On/Off according to pre-set commands.

Manual On/Off

Pre-set On/Off commands can be interrupted by using manual

 

override switch located on top of unit. When switched to

 

OUTLET ON, connected appliance is switched on permanently.

 

To reactivate timer’s control of applicance, turn applicance switch

 

on and set timer’s override switch to TIMER ON. In case of power

 

failure, reset timer as explained above.

Specifications:

125V~, 60Hz
15A, 1875W Resistive
10A, 1250W Tungsten
Min. Temperature: 0

°

Max. Temperature:

 

55

°

PRECAUTIONS

For indoor use only.
Do not use with any appliance which exceeds capacity
of timer.
Always ensure that appliance plug is fully inserted into timer.

 

If timer needs cleaning, unplug and wipe with a dry cloth.

 

Do not immerse in water or any liquid.

FAN HEATERS AND HEATERS WITH EXPOSED ELEMENTS

 

SHOULD NOT BE CONNECTED TO TIMERS.

Limited One Year Warranty

AmerTac

 warrants this product to be free from defects in material and

 

workmanship for a period of one year from the date of purchase. AmerTac’s

 

obligations are limited to repairing or replacing any defective unit and are

 

effective only if such units are returned within one year of the purchase

 

date to AmerTac, 

250 Boulder Drive, Breinigsville, PA 18031

. Warranty void 

if damage is due to misuse or improper

 

installation. In no circumstance 

will AmerTac be liable for consequential or

 

incidental damages relating in 

any way to this product.

Reviews: