Heavy Duty
Transmission Jack
Operating Instructions and Parts Manual
1ZKY1A and 1ZKY3A
SHI039
Printed in China
082019
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself
and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain instructions for future reference.
Description
Westward Heavy Duty Hydraulic Transmission Jacks are designed for lifting and lowering of transmissions and
differentials from various vehicles ie. car, truck, etc. Reinforced steel construction with flanged side frames provides
extra strength. Load restraining chains assure the user’s safety when lifting and lowering load. Casters allow easy
movement and positioning. The saddle has both side and tilting angle adjusting functions to best accommodate
various transmissions and differentials. Patented oil by-pass mechanism offers stroke limitation of ram piston. Metered
release valve assures precise adjustment of cradle height and smooth lowering of load.
Specifications and Dimensions
General Safety Information
Save these instructions.
For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator’s native language, making sure that the operator comprehends their
contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this device,
remove from service immediately.
Inspect before each use.
Do not use if abnormal conditions such as cracked welds, damaged, loose or missing parts
are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall be
removed from service until repaired. If the equipment has been or is suspected to have been subjected to an abnormal
load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact distributor
or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be made by an
authorized repair facility. Labels and Operator’s Manuals are available from the manufacturer.
Model
Capacity
Min Height
Max Height
1ZKY1A
1,100 lbs (500 kg)
9" (22.86 cm)
24-3/4" (62.87 cm)
1ZKY3A
2,000 lbs (908 kg)
7-7/8" (20 cm)
33-1/2" (85.09 cm)
Pump Handle
Release Valve Knob
Saddle
Saddle Adjustment
Knobs
