background image

Summary of Contents for KECT 365

Page 1: ... proper volt amp and breaker ratings per Electrical Specifications given in this booklet Cl 3 All connections made in accordance with local and or National Electrical Code OPERATIONAL Cl 1 Knobs installed on switches Cl 2 Individual element indicator light comes on when the element is turned on Unless instructed to leave for owner remove all tags labels and internal packing material THANK YOU INST...

Page 2: ... by a qualified electrician who is familiar with the National Electrical Code and or Local Codes WARNING DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT Before installing unit be sure that the electrical supply meets the electrical specifications given in this booklet SECTION A ELECTRICAL SUPPLY A junction box not provided ...

Page 3: ...ATION Flg 1 CONTINUE INSTALLATION INSTRUCTIONS WITH SECTION E INSTALLING UNIT SECTION D CABINET CONSTRUCTION REPLACEMENT INSTALLATIONS THE FOLLOWING INSTRUCTIONS ARE FOR REPLACEMENT INSTALLATIONS ONLY All cooktops are designed for installation in a base cabinet with a countertop depth of 24 For information on top cabinet loca tion see notes below The minimum and maximum countertop cutout dimension...

Page 4: ... seal strip l 8 from the inside edge of the glass in one continuous piece strip will overlap four sup port brackets See Figure 5 Cut off any excess material STEP 5 Using the 5 16 fl screws loosely screw the plain end of clamping brackets into each hole on the bot tom of the cooktop See Figure 6 Rotate the brackets inward Return cooktop to countertop cutout using outline as a guide for lowering coo...

Reviews: