background image

U.S. Audio 

whirlwind 

OPERATIONS MANUAL 

Mix 6 

STEREO MIXER 

 

UNPACKING

INTRODUCTION

US Audio has made e\'erv effort to ensure that your equipment is received 

Thank you for selecting the US Audio Mix 6. The Mix 6 delivers the ultimate 

in the same perfect condition it was in when it left the factory. Please 

in sonic performance for the most demanding professional mic and line 

inspect your product for any signs of damage during shipping and report 

mixing applications. Utilizing the Analog Devices 2017 

IC, 

a carefully 

them to your dealer so that he can present a claim to the shipper. \Ve 

wound toroidal power transformer, trUe star grounding, plus many other 

recommend that you save your packaging material for use in the unlikely 

design features, the Mix 6 has a working signal to noise ratio (S/N) of 92db 

event that you need to return your equipment for service.

with 22dB headroom at unity gain! At 40dB of gain the Mix 6 holds a working 

S/N of 85dB making it ideally suited for production with digital recording 

media. The Mix 6 can provide up to 76dB of gain, with a professional quality 

signal to noise ratio and still have 10 to 15dB of headroom. Other features 

include 2 stereo aux inputs, one of which can be used as a separate monitor 

input, a stereo peak limiter, low cut filters and a headphone circuit. \Vith a full 

complement of hook-up hardware, the Mix 6 is capable of handling any 

configuration of line or mic level signals as well as any combination of 

balanced or unbalanced XLR and 1/4” connectors.

Summary of Contents for Mix 6







Reviews: