background image

WORKSIGHT

SIDE SHIELD REMOVAL AND ASSEMBLY

COPYRIGHT © 2015 WILEY X, INC. ALL RIGHTS RESERVED.

WILEY X, WX, BLACK OPS, logos, tag lines and product names are trademarks or registered trademarks (marcas 
registradas) of Wiley X, Inc. in the U.S. and other countries.  Logos © 2007-2015 Wiley X, Inc. All rights reserved.

To assemble the side shields into the frame, fully insert the side 
shield “hooks” into the temple arm.  Firmly grasp the temple arm 
and grasp the side shield.  Slide the shield toward the face frame 
firmly until there is an internal snap to lock the side shield into 
position.  The side shield is not fully attached until it is snapped 
(you will hear the click).

MAINTENANCE:

 

 

Wiley X lenses are specially coated to offer superior abrasion 

resistance.  Please follow below instructions to prolong the life of your lenses 

and keep them performing at their best:

WARNING: Wiley X brand eyewear is tested tough.  However, impact resistant 

eyewear is not unbreakable and does not provide unlimited eye protection under all 

circumstances and conditions. Misused, abused, scratched and/or damaged 

eyewear can reduce impact protection (and void your limited warranty).  Dirty 

and/or wet eyewear can impair vision and reduce safety (resulting in personal 

injury and/or property damage). Keep your Wiley X eyewear clean with water only.  

Do not use solvents or abrasives as it could scratch or damage the product 

reducing its effectiveness.   Store your Wiley X eyewear in the protective case 

provided to prolong the life of the lenses.  Most of all, take all appropriate 

precautions when wearing your Wiley X eyewear during hazardous and/or 

dangerous activities and conditions.   Wiley X, Inc. is not responsible for personal 

injury, property damage or losses incurred while using Wiley X brand products.

Clean lenses with water only.                                   

Do not use solvents or special cleaners.  

Use micro-fiber cleaning cloth provided to gently wipe clean.  

Never use paper products to clean and avoid wiping lens surface when dry 

and/or dirty as this may potentially scratch the lens.

WSCARD    REV1 

7800 PATTERSON PASS ROAD, LIVERMORE CA 94550 USA

SØNDERGADE 8-10  7570 VEMB   DENMARK

Reviews:

Related manuals for WORKSIGHT