background image

-

 

www.windsterhood.com

User’s Manual 

HI30SS 
HI36SS 
HI42SS 

 

 

 

 

 

  

 

Please read this operation manual thoroughly before 
using your range hood. Store it in a safe location for 
when you need to reference it in the future.

 

NOTE: PLEASE INSPECT HOOD 
IMMEDIATELY UPON RECEIVING. 
CLAIM OF DAMAGE AFTER 7 DAYS 
OF DELIVERY WILL BE DENIED.  

This unit was designed for indoor 
residential use only. DO NOT USE 
OVER A WOOD GRILL OR MOUNT 
IN OUTDOOR ENVIRONMENT.  

ISLAND SERIES 

 

TABLE OF CONTENTS

Table of Contents 

Safety Information  ................................................................ 2 – 3 

Content Checklist  ....................................................................... 4 

Measurements  ............................................................................ 5 

Preparation  ................................................................................  6 

Installation  ............................................................................ 7 – 8 

Installation Diagram  ................................................................... 9 

Operation & Features  ............................................................... 10 

Cleaning & Maintenance  .......................................................... 11 

Troubleshooting  ....................................................................... 12 

Part List / Replacement  ........................................................... 13 

Warranty / Contact Us  ...................................................... 14  –  15 

Summary of Contents for HI30SS









Reviews: