background image

FLIP-DOWN SCREEN VIDEO 
PLAYERS
(Rear Bunk models only)

–If Equipped

The flip-down LCD screen DVD 

Video Players are mounted overhead in 
each of the bunk beds. 

The Video Players operate 

independently so the occupant of one 
bunk may watch a DVD while the other 
watches a different DVD. The players 
each contain auxiliary audio-video 
inputs for connection of a video game 
system or other audio-video equipment 
if desired.

Remote Control and 
Wireless Sound


sensor 
array 
above 
the screen of each Video Player 
receives command signals from the 
remote control.

The sensor array also continuously 
transmits wireless sound signals for 
reception on IR wireless 
headphones.

See Video Player instruction guide in 
your InfoCase for remote control 
instructions and additional 
information on wireless headphones.

12-Volt Master 
Power

The Video Players 
operate on 12-volt DC 
current. Turn on the 
12-Volt master power 
(TV) switch shown, located on the 
back wall of the top bunk.

 

NOTE: To avoid drain on the 12-Volt 
house battery, we recommend 
turning the master power switch off 
when Video Players will not be in 
use.

Video Player Power ON/OFF

Press the  

POWER

 button 

on either the remote 
control or the unit once to 
turn the power on. Press 
the same button to turn 
the player off.

Push the open button (located on the 
front of your screen) and lower the 
monitor to the desired level.  You 
may also adjust the swivel angle.

To Play DVD

Insert the DVD 
label side down 
(facing you) into 
the slot on the side 
of the player. The 
player will automatically switch to 
DVD mode. The screen will display 
the DVD logo and begin to read the 
disc.

The DVD may load directly to the 
main title/menu screen or it may 
begin to play previews. You may be 
able to skip previews if desired by 
pressing the “

NEXT

” button on the 

remote until you see the main menu 
screen.

When the main menu screen appears, 
press the 

PLAY

 button on the player 

or 

ENTER

 button on the remote 

control to begin playing the feature, 
or use the arrow buttons to select the 
desired entry.

Volume is adjusted with the +/- 
buttons on the player or the remote 
control.

To Play CD Audio (or CD 
Video)

The Video Player is also capable of 
playing CD Audio music and CD 
Video discs.

POWER

AV

MENU

POWER

Continued—

Reviews: