DVR-0022A
User Guide
I. Overview
1) Indicator Light
2) Camera Lens
3) Video/Camera Button
4) Power On/Off Button
5) Micro SD Card Slot
6) USB Port
2. Product Accessories
USB Cable
3. Operation
>> Please make sure your camera is fully charged before using.
>> Please make sure the Micro SD card is securely fitted into the SD card slot on
your camera. Camera will not work without a Micro SD card.
>> Camera is fully charged when the red light indicator is solid on.
1) POWER ON/OFF
(1) Hold down the Power On/Off Button for 2 seconds, the camera will be turned on
and enter into standby mode automatically. The camera will vibrate once for 5
seconds and the red light indicator will stay illuminated.
(2) Power off the camera by holding down the Power On/Off Button for 2 seconds,
the camera will be turned off. The camera will vibrate twice and the red light
indicator will turn off.
(3) The camera will shut down automatically if the camera is in standby mode
without any operation in 1 minute.
2) VIDEO RECORDING
(1) Power on the camera by holding down the Power On/Off Button for 2 seconds
and the camera will enter into standby mode automatically.
(2) Press and hold the Video/Camera Button for 2 seconds, the camera will start
video recording. The camera will vibrate once and the red light indicator will flash
once and turn off.
(3) Press the Video/Camera Button once to stop video recording and the camera
will enter into standby mode. The camera will vibrate twice and the red indicator
light will be illuminated.
(4) Press and hold the Video/Camera Button for 2 seconds to resume video
recording.
Attention:
The camera will save video files automatically every 10 minutes.
Video format: avi
Video resolution: 720 x 480
3) CAMERA/STILL PHOTOGRAPHY
(1) Power on the camera by holding down the Power On/Off Button for 2 seconds
and the camera will enter into standby mode automatically.
(2) Press the Video/Camera Button once to take a photo. The camera will vibrate
once and the red light indicator will flash every time you take a photo.
4) AUDIO RECORDING
(1) Power on the camera by holding down the Power On/Off Button for 2 seconds
and the camera will enter into standby mode automatically.
(2) Press the Power On/Off button once to record audio. The camera will vibrate 6
times and the red light indicator will flash 3 times and then turn off
(3) Press the Power On/Off button once to stop audio recording and the camera will
enter into standby mode. The camera will vibrate 3 times and the red indicator light
will flash 3 times.
5) VIDEO/PHOTO/AUDIO FILE UPLOADS
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Connect the card reader to a proper PC computer USB port with the USB cable
provided.
(3) The camera will be recognized as a removable disk drive.
(4) All of your video, photo and audio files can be accessed in the drive.
6) SET THE DATE/TIME STAMP
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Connect the card reader to a proper PC computer USB port with the USB cable
provided.
(3) Removable disk drive folder appears
(4) Click on the drive in the root directory and inside the root directory, create a
time.txt file.
(5) Write the desired date and time in the txt file with the correct format:
Year-Month-Date Hour:Minute:Second. Save this file.
(6) Restart the camera and the system will upgrade the program automatically.
7) CHARGING
(1) Connect the camera to a PC computer or a DC5V charger adapter (recommended)
with the USB cable provided.
(2) The red light indicator will flash during the charging process.
(3) Camera is fully charged when the red light is solid on.
(4) It will take up to 2 hours to obtain a full charge.
(5) The camera can record videos for 40 minutes continuously with a fully charged
battery.
