For Customer Care call: Toll Free 800-562-5625 or info@hamptonproducts.com
©2015 Hampton Products International Corp.
50 Icon, Foothill Ranch, CA 9 2610-3000 USA
www.hamptonproducts.com
1-800-562-5625
91000_WC13-14_REVA 07/15
#95260000
DOOR CLOSER
WC13/WC14 INSTALLATION INSTRUCTIONS
BEFORE STARTING THE INSTALLATION
1. PARTS AND ASSEMBLY DIAGRAM
2. LOCATION OF CLOSER ON THE DOOR
Compare the requirements of the installation with the specifications below, to make sure the correct model of
CLOSER will be installed.
3. INSTALLATION PROCEDURE
Model
Type
Maximum door width
Maximum door weight
Maximum open angle
body mounted on door
WC13 / WC14
UL
Listed
38"
140 lb.
120°-
155°
2A. INWARD OPENING DOOR
This illustration shows the mounting for
inward
opening doors, as
seen from inside
the building.
(RIGHT HAND DOOR)
(LEFT HAND DOOR)
2B. OUTWARD OPENING DOOR
This illustration shows the mounting for
outward
opening doors, as
seen from inside
the building.
(RIGHT HAND DOOR)
(LEFT HAND DOOR)
Perform each of the following seven steps in sequence.
3A. POSITIONING TEMPLATE
Templates to help position the CLOSER correctly are provided on an enclosed
sheet,
BE SURE TO USE CORRECT TEMPLATE.
For installation of model WC13 or WC14, decide the maximum opening angle
for the door (120° or 155°) before cutting out the template. The template must
be cut differently for each angle.
Tools needed for installation
: Hammer, #2 Phillips Head Screwdriver, 1/8" and 5/32" drill bits, Punch, Drill & Tape.
Check that all parts shown in the parts list and in the illustration are present.
Match screw size and type to hardware drawing.
Determine whether the door is left or right hand using the following
illustrations. Remember that the CLOSER is always mounted inside the
building near the hinge edge of the door
Ref No.
Name of Parts
Qty.
1
2
3
4
5
6
7
8
Body
1
Main Arm
1
Main Arm Screw (Hex Head), Lock Washer & Washers
1
1
Forearm Screw (Pan Head), Lock Washer & Washers
1
Forearm and Link Arm Shoe
Phillips Oval Head Wood Screw #10 x 1-1/4"
6
Phillips Oval Head Self-Tapping Screw 10-32 x 3/4"
6
Body Cover
1
FOR WOOD
FOR ALUMINUM
OR STEEL
For Body
and
Link Arm Shoe
( 6 )
( 7 )
(SCREWS SHOWN ACTUAL SIZE)
3
6/7
5
8
4
1
6/7
2
