background image

Copyright © 2021 WyreStorm Technologies | 

wyrestorm.com

EXP-SW-0401-H2 Quickstart Guide | 210112

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)  

support@wyrestorm.com

1 of 2

WyreStorm Essentials 4K HDR 4x1 HDMI Switcher with  

Auto-Switching, HDCP 2.2 & Remote

EXP-SW-0401-H2

  IMPORTANT! Installation Requirements

•  Visit the product page to download the latest firmware, document version, 

additional documentation, and configuration tools.

•  Read through the 

Wiring and Connections

 section for important guidelines 

before creating or choosing premade cables.

In The Box

1x EXP-SW-0401-H2 Switcher   

 

1x 12V DC Power Supply (US/UK/EU/AU)   
2x Mounting Brackets
1x IR Remote Control
1 x IR Receiver Cable

Basic Wiring Diagram

  

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation 

process.

Wiring and Connections

WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its 
entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.

 

  

IMPORTANT! HDMI Wiring Guidelines

•  The use of patch panels, wall plates, cable extenders, kinks in cables, and electrical or environmental interference will have an adverse effect on HDMI 

transmission limiting performance. Steps should be taken to minimize or remove these factors completely during installation for best results.

•  WyreStorm recommends using high quality HDMI cables such as WyreStorm Essentials to ensure the highest content performance available.

Installation and Operation

1.  Connect HDMI sources to the HDMI IN ports using a good quality HDMI cable.
2.  Connect an HDMI display devices to the HDMI OUT port of the switcher.

Note:

  The switcher is powered via mains power supply to the unit. WyreStorm recommend using only power adapter supplied.

3.  Turn the power on ensuring LED power indicators are fully lit on the front of the switcher. If not, check power cable is firmly connected.

Quickstart Guide

4K Blu-ray Player

Display Device

Streaming Device

Remote

Control

4K Sa

tellite Box

Games Console

KEY

HDMI
Control
Power

Reviews: