Istruzioni pacco batterie_EN;Jan14
DESCRIPTION USE OF BATTERY PACK MP-10000 EN
Instructions for recharging
1. Remove all components from packaging and check any visible damage of the device.
2. Connect battery pack to mains power supply (AC 100-240V 50/60hz) as shown below.
3. Connect power supply to battery pack in connector INPUT
4. Connect power supply to main socket.
5. Recharging time is 5 hours approximately.
1
Battery pack
2
Power supply for battery pack recharging
INSTRUCTIONS FOR BALANCE CONNECTION
1
Power supply of balance.
2
Cable connection balance battery pack
3
Selector output voltage of battery pack. (Select 9V)
1. Place the selector (3) at 9V indication on the upper side of battery pack.
2. Connect provided connection cable (2) in connector OUTPUT of battery pack.
3. Connect the other end of the cable (2) to balance power outlet.
4. Press power button on battery pack (4).
5. Duration of charging is 40 hours appromately.
1
2
1
2
3
4