7110(F), 7170(F)(LBR)
Surface Vertical Rod Exit Device Series
Installation Instructions
All dimensions are in inches (mm) unless otherwise noted.
Dogging
Feature to hold bolts retracted and
touchpad depressed, for push-pull door
operation.
To Dog Device
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
(Not a feature of fire labeled devices.)
PPHMS
PHILLIPS PAN HEAD MACHINE SCREW
PPH”AB”SMS
PFHUMS
PFHMS
PRH”AB”SMS
PFH”AB”SMS
PHILLIPS PAN HEAD TYPE “AB” SHEET METAL SCREW
PHILLIPS FLAT HEAD MACHINE SCREW
PHILLIPS FLAT HEAD TYPE “AB” SHEET METAL SCREW
PHILLIPS ROUND HEAD TYPE “AB” SHEET METAL SCREW
PHILLIPS FLAT HEAD UNDER CUT MACHINE SCREW
FASTENER DESCRIPTION
ABBREVIATION
PTH”AB”SMS
PHILLIPS TRUSS HEAD TYPE “AB” SHEET METAL SCREW
(2) 1/4-20 X 1" PPHMS
(Metal Door)
or
(2) #14 x 1-1/2" PPH”AB”SMS
(Wood Door)
Cover
(3) 10-24 x 1/4" (6mm) PPHMS
Top Latch
(Panic & Fire Label)
Bottom Bolt Case
Panic & Fire Label
Top Rod
(2) 1/4-20 X 3/4" PFHMS
(Metal Door)
or
(2) #14 x 1-1/2" PFH”AB”SMS
(Wood Door)
Bottom Rod Assembly
Deadbolt
790 Strike
Bolt Case Cover
(2) 8-32 x 1/4" (6mm) PFHMS
Bottom Mounting Plate
(2) #8 x 1/2" (13mm) PRH”AB”SMS
Guide Cover
(2) #6 x 3/8" (10mm) PTH”AB”SMS
Rod Guide
Roll Pin
Latch Cover
791 Strike
Strike Plate
Shim (2) Supplied
(3) 10-24 x 3/4" (19mm) PFHMS
Top Mounting Plate
Hole Plug
(Fire Label Devices)
(2) 8-32 x 5/16" (8mm) PFHUMS
Rod Guide
Guide Cover
(3) 10-24 x 1/4" (6mm)
PPHMS
(2) 8-32 x 1/4" (6mm) PFHMS
(2) #6 x 3/8" (10mm)
PTH”AB”SMS
Top Rod Connector
(2) #8 x 1/2" (13mm) PRH”AB”SMS
(2) 1/4-20 X 3/4" PFHMS
(Metal Door)
or
(2) #14 x 1-1/2" PFH”AB”SMS
(Wood Door)
‘
Dogging Key
(3) 8-32 x 5/16"
PFHUMS
(2) 1/4-20 X 1" PPHMS
(Metal Door)
or
(2) #14 x 1-1/2" PPH”AB”SMS
(Wood Door)
End Clamp
End Cap
Top bracket and 726 strike
required for 7170(F)(LBR).
Strike Angle Must
Engage Strike
726
Top Strike
12-24
PRHMS
PRHMS
PHILLIPS ROUND HEAD METAL SCREW
An ASSA ABLOY Group brand
80-9470-0010-000 (03-13)
