background image

1 0 0 9 7 5

SERVICE MANUAL

CRX-M170

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product  may result in personal
injury, destruction of expensive components and failure of the  product to perform as specified. For these reasons,
we advise all YAMAHA product owners that all service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization,  certification  or
recognition  of  any  applicable  technical  capabilities,  or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and
service departments of YAMAHA are continually striving  to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact
the distributor's Service Division.

WARNING:

Static discharges can destroy expensive components. Discharge any static electricity your body may have accumu-
lated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

MAINTENANCE FLOW CHART (TUNER) .................. 9
WIRING DIAGRAM 
..................................................... 10
PRINTED CIRCUIT BOARD 
................................ 11–13
BLOCK DIAGRAM 
...................................................... 14
SCHEMATIC DIAGRAM 
....................................... 15–17
REMOTE CONTROL 
.................................................. 19
PARTS LIST 
.......................................................... 20–21

■ 

CONTENTS

TO SERVICE PERSONNEL ..................................... 2–3
PREVENTION OF ELECTRO STATIC DISCHARGE 
..... 4
REAR PANEL 
............................................................... 4

SPECIFICATIONS ......................................................... 5
INTERNAL VIEW 
.......................................................... 6
DISASSEMBLY PROCEDURES 
.............................. 6–8
MAINTENANCE FLOW CHART (CD) 
......................... 9

CD/DAB RECEIVER

CRX-M170

STANDBY/ON

1

2

3

4

5

6

7

8

9

0

BAND

PRESET

TUNER

TIMER

DIMMER

SLEEP

FUNCTION/ 

FM MODE

INFO/TEXT AUTO TUNE ENTER

AUX 2

AUX 1

TAPE

CD

REPEAT

A-B

PROG

CLEAR

RANDOM

TIME

MUTE

VOLUME

+

© 2005 YAMAHA CORPORATION. All rights reseved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.

  

  ’05.09

Summary of Contents for CRX-M170






















Reviews: