background image

0.768K-041       

  Printed in Japan ’02.03

EG

011632

ELECTRIC BASS

HAMAMATSU, JAPAN

 CONTENTS

OVERALL ASSEMBLY

............................................ 2

CIRCUIT DIAGRAM

.................................................. 4

WIRING

.................................................................... 4

SPECIFICATIONS

................................................. 4

This document is printed on chlorine free (ECF) paper with soy ink.

WARNING : CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and Welfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR
MOUTH FOR ANY REASON WHAT SO EVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!

If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.

RBX170

SERVICE MANUAL

Summary of Contents for RBX170

Page 1: ...nents may also contain traces of chemicals found by the California Health and Welfare Agency and possibly other entities to cause cancer and or birth defects or other reproductive harm DO NOT PLACE SOLDER ELECTRICAL ELECTRONIC OR PLASTIC COMPONENTS INYOUR MOUTH FOR ANY REASON WHAT SO EVER Avoid prolonged unprotected contact between solder and your skin When soldering do not inhale solder fumes or ...

Page 2: ...23a E23 G01 G04 G03 G06 G09 G08 E17 MASTER TONE 05A 250KΩ E27 F01b F01c REAR VOLUME 15A 250KΩ E27 F01a FRONT VOLUME 15A 250KΩ E27 F01a E29 E31 E08 E09 E11 E12 F01 F12 F13 F11 F11a F11b F17 OVERALL ASSEMBLY Jack Installation F11 Bridge Assembly Fender Type 1214B QC509200 E17 B02 B03 B04 B05 B01 B06 F11b F17 F11a F13 F12 F11 F11a ...

Page 3: ...A 250K ohm MASTER TONE 03 F01c Mylar Capacitor 0 047uF 50V J 01 F11 Jack MONO 03 F11a Hexagonal Nut 2 F11b Flat Washer F12 Jack Panel Black 02 F13 Oval Head Wood Screw 2 7X13 FCM3BL Black 4 03 F17 Toothed Lock Washer 9S FNM33G Nickel 01 G01 Pickup Assembly S C Split PB AF FRONT 08 G03 Pan Head Tapping Screw 2 6X35 FCM3BL Black 4 02 G04 Pickup Cushion 2 01 G06 Pickup Assembly S C JB R REAR 07 G08 P...

Page 4: ... NECK Material Maple Neck Thickness 1 F 21 0mm 12 F 24 4mm PAR TS Hardware Chrome Plated Nut Urea Bridge Fender Type 1214B Chrome Strings H4030 CONTROLS Volume 15A 250KΩ x 2 Tone 05A 250KΩ x 1 PICKUPS Front Single Coil Split Type Rear Single Coil Magnet Front Rear Ceramic WIRING CIRCUIT DIAGRAM FRONT PICKUP REAR PICKUP REAR VOLUME FRONT VOLUME MASTER TONE OUTPUT 05A 250KΩ 15A 250KΩ BPPJ 03 1 2 3 3...

Reviews: