background image

1

Before using your timpani for the first time be sure to carefully
read the instructions on 

“Initial Preparation”

 pages 6 and 7.

Thank you for purchasing a Yamaha Timpani.

Please read through this manual carefully as it contains impor-

tant information about your instrument’s care.

Contents

Precautions ................................................. 2

Nomenclature & Lubrication ..................... 3

Transporting and Setting Up the Timpani ... 4

Setting up the Timpani ....................................... 4

Adjusting Pedal Height ....................................... 5

Transporting ....................................................... 5

Relocating the Tuning Indicator .......................... 5

Initial Preparation ....................................... 6

Adjusting the Pitch ..................................... 8

Head Tuning ....................................................... 8

Pedal Adjustment ............................................... 9

Tuning Indicator Adjustment ............................ 10

Replacing the Head .................................. 11

PEDAL TIMPANI

Owner’s Manual

TP3100(EA)

 Series

TP3123(EA) / TP3126(EA) / TP3129(EA) / TP3132(EA)

English

tp3100ea_en_om.6pm

08.2.5, 9:28 AM

1

Summary of Contents for TP-3123












Reviews: