Change IP and Communication Parameters On V1000
Quick access for the correct parameters:
The default IP from the factor is 192.168.1.20. Each of those numbers is an octet, and we will be
changing the third and fourth octet. The resulting IP address will be 192.168.208.90
(Some of this information is from
Quick Start Settings for EtherNet IP and Modbus TCP/IP option
)
Parameter Number
Parameter Description
Settings for Ethernet, PROFINET and
Modbus TCP/IP
F7-01
IP Address 1
192: Sets the most significant octet
(192 is the default value)
Example: 192.168.001.020
F7-02
IP Address 2
168: Sets the second significant octet
(168 is the default value)
Example: 192.168.001.020
F7-03
IP Address 3
208: Sets the third significant octet
(001 is the default value)
Example: 192.168.208.020
Yaskawa V1000 / A1000 /
GA500 / GA800 TCP Modbus
Communication Setup
For GA series drives make sure the Yaskawa Drive Wizard is updated to the most
recent version.
Set these parameters from the front panel of the VFD and cycle power.
Summary of Contents for PROFINET V1000
Page 4: ...correct parameters...
