User's
Manual
All Rights Reserved, Copyright ©
2014 Yokogawa Test & Measurement Corporation
Printed in Japan
Thank you for purchasing the AC adapter.
This product is designed to be used by a person with specialized knowledge.
This User's Manual describes the specifications and handling precautions of the AC adapter.
Before using the AC adapter, thoroughly read this manual to get a clear understanding on proper use.
For detailed handling procedures, refer to the instrument (main unit) User's Manual.
This manual is an essential part of the product; keep it a safe place for future reference.
WARNING
• To prevent the possibility electrical shock or fire, be sure to use the AC adapter and
the power cord supplied by YOKOGAWA.
• This product is intended for use in combination with Yokogawa products that refer to it only.
• Check that the power source voltage matches the supply voltage rating of the AC adapter,
and then connect to the outlet.
• Check that the power switch of the instrument is turned OFF and then connect the AC adapter.
• If the instrument is not used for a prolonged period, disconnect the AC adapter from the outlet.
• Do not place anything on the AC adapter or power cord, and prevent heat sources from coming
into contact with them.
• When unplugging the power cord from the outlet, be sure to hold the plug and never pull
the actual cord.
• When cleaning the AC adapter, disconnect the AC adapter from the outlet and gentry wipe
the external surfaces with a soft clean cloth. Do not use chemical such as benzine or thinner.
• Do not throw (dispose of ) the AC adapter in fire or apply heat to it.
• Do not use it, where the code is bundled (bent).
• If the power cord is damaged, contact your dealer.
Model
Suffix Code
Specifications
94016
-F
-S
Power cord:
VDE standard
BS standard
Make sure that the attached power cord meets the designated standards of the country and
area that you are using it in.
■ Specifications (Power Supply Rating of the AC Adapter)
Rated supply voltage:
220 to 240 VAC
Rated supply frequency:
50/60 Hz
No load Current:
45 mA
Output voltage rating of AC adapter:
8.5 VDC, 150 mADC
Operating temperature:
-10 to 40°C
Safety standards:
EN 60950-1
Pollution degree 2, Indoor use,
Altitude 2000 m or less
EMC standards:
EN 55032 Class B, EN 55024
EN 61000-3-2, EN 61000-3-3
94016
AC Adapter
IM 94016-EN
5th Edition: Oct. 2017 (YMI)
