YOKOGAWA JUXTA F Series, User Manual

User’s

Manual

1

Thank you for purchasing the JUXTA Signal Conditioner.

Please read through this manual before use for correct handling.

2-9-32, Naka-cho Musashino-shi, Tokyo 180-8750 Japan

http://www.yokogawa.com/ns/juxta/im/

You can download the latest manuals from the following website:

IM 77J08P01-01EN

1st Edition Oct. 2017 (YK)

CAUTIONARY NOTES FOR SAFE USE OF THE 

PRODUCT

This User’s Manual should be carefully read before installing and 

operating the product. Please keep this User’s Manual for future 

reference. The following symbol is used on the product and in this 

manual to ensure safe usage.

 WARNING

Calls attention to actions or conditions that could 

cause serious or fatal injury to the user, and indicates 

precautions that should be taken to prevent such 

occurrences.

The following symbols are used only in this manual.

 CAUTION

Calls attention to actions or conditions that could 

cause injury to the user or damage to the instrument 

or property and indicates precautions that should be 

taken to prevent such occurrences.

CHECKING PRODUCT SPECIFICATIONS AND 

PACKAGE 

(1) Checking the Model and Product Specifications

Check that the model and specifications indicated on the 

nameplate

attached to the main unit are as ordered.

(2) Packaged Items

Check that the package contains the following items:

z

FP1P: 1

z

Mounting block: 2

z

Tag number label : 1

z

Mounting screw (M4 x 0.7): 2

z

User’s Manual (this manual)

GENERAL

The FP1P is a compact, front terminal connection type pulse 

repeater that converts pulses from voltage-free contacts, open 

collector contacts, voltage pulses, and current pulses into isolated 

transistor switch pulses.

MODEL AND SUFFIX CODES

Model

Suffix codes Description

FP1P

-



1 *C Pulse Repeater

Input  Signal

-1

Transmitter power supply (12 V ±10%)

-2

Transmitter power supply (24 V ±10%)

Output Signal

0

Open collector

Style code

*C Style C

1.  MOUNTING METHOD

1.1 

Installing/Uninstalling the Mounting Block

The mounting block is necessary for rack mounting or wall 

mounting.

Installing the mounting block

z

Fit the mounting block into the grooves of the converter, and 

slide it in the direction of an arrow as shown below-left.

Uninstalling the mounting block

z

Lift the stopper using a slotted screw-driver as shown be-

low-right, and pull the mounting block to remove it.

Groove

(Rack mounting)

Groove (Wall mounting)

Stopper

Mounting block

1.2  Rack Mounting

Take the FRK panel and install it on a mounting angle as shown 

below. This method is suitable for high density mounting of the 

converters on a 19-inch rack panel.

Mounting angle

M5 screw

(4 places)

FRK panel

Mounting screw (M4x0.7)

(2 screws in the package)

Mounting Dimensions

Mounting angle

450±1

465±1

Supplied spacer(50) or Wiring space(30 to 60)

50
25

25
50

Unit: mm

FP1P

Pulse Repeater