background image

1

To prevent fire or electrical shock, please do not expose the product to 

rain or moisture.

To avoid short circuit, please make sure the batteries contacts are 

securely packed and in accordance with local provisions when handling 

the battery.

Keep the batteries and other accessories out of the reach of children. If a 

child or infant swallows a battery or accessory, please contact a doctor 

immediately.

To avoid possible injury to eyes, do not use the flash near the eyes.

To avoid possible safety accident, do not use the flash light on the 

people who need to keep highly focused.

If the following situations happen, please remove the batteries 

immediately and stop using the flash:

The product falls or is struck seriously and internal parts are exposed.

If the corrosive liquid inside the battery leaks, please take out the 

battery with gloves.

The product gives off strange smell, heat, or smokes.

Do not disassemble or repair this product by yourself. High-voltage 

internal parts may cause electrical shock.Please remove all the batteries 

when the product is not in use for a prolonged period.

Precautions

Conventions used in this user manual:

In  order  to  learn  and  master  the  operation  of  this  speed-lite,  at  the 

meanwhile  you  read  this  manual,  please  take  user  manual  of  your 

camera as reference.

In every operating step, we assume that both camera and speed-lite are 

power on.

Icons used in this user manual

:Supplementary information

:Long press the button

:Short press the button

Summary of Contents for YN650EX-RF





























Reviews: