background image

 

EPDT-049a

 

MODEL SY-10 

STRAINER 

 

PRODUCT MANUAL

 

.

 

Thank you very much for choosing the Yoshitake’s product. To ensure the correct and safe use of the product, 

please read this manual before use. This manual shall be kept with care for future references. 
The symbols used in this manual have the following meanings. 

 

          Warning 

This  symbol  indicates  a  potentially  hazardous  situation  that,  if  not  avoided, 
could result in death or serious injury. 

          Caution 

This symbol indicates a hazardous situation that, if not avoided, may result in 
minor or moderate injury or may result in only property damage. 

 

 

Table of Contents 

 

1. Overview ·································································· 1 

2. Features ·································································· 1 

3. Specifications ···························································· 1 

4. Dimensions ······························································ 2 

5. Operation ································································· 2 

6. Nominal Size Selection ··············································· 3 

6.1 Selection of nominal size ········································ 3 

6.2 Selection of nominal pipe size ································· 3 

6.3 Pressure Loss Chart ·············································· 4 

7. Maintenance   ··························································· 5 

7.1 Precaution for installation ······································· 5 

7.2 Precaution for operation ········································· 5 

8. Disassembly, Cleaning and Reassembly ························ 6 

8.1 Precaution for disassembly and inspection ················· 6 

8.2 Precaution for reassembly ······································ 6 

9. Piping Example ························································· 6 

Warranty Information 

 

 

 

 

 

 

Summary of Contents for SY-10 Series









Reviews: