background image

NINGBO YOUWON TECHNOLOGY ELECTRONICS CO., LTD 

ADDRESS 

#928, XUEYUAN ROAD, LUGANG VILLAGE, GAOQIAO TOWN, NINGBO TELE 

PHONE

0574 88046201                                           FAX

0574-88046202 

 

ZF01-C Wireless Module 

Operation Manual 

 

 

Figure 1. ZF01-C wireless module 

 

z

 

Features: 

1. 

Providing RS-422 interface

highly integrated

can connect with transceiver equipment 

  directly. 

2.    Low power RF transmission

Maximum transmit power 10mW 

3.  GFSK/FSK modulation mode 
4.  Crystal frequency stabilization

.

 

5.    High-efficiency forward error correction channel encoding technology is used. 

 

 
 

z

 

Main Application Areas: 

1.    AMR – Automatic Meter Reading 

2.    Wireless alarm and security systems 

3.  Wireless POS, PDA  

4.    Long-distance non-contact RF smart cards, RFID tags. 

5.

 

Wireless Field Bus

wireless conference voting system   

 
 
 
 
 

Summary of Contents for ZF01-C

Page 1: ...egrated can connect with transceiver equipment directly 2 Low power RF transmission Maximum transmit power 10mW 3 GFSK FSK modulation mode 4 Crystal frequency stabilization 5 High efficiency forward error correction channel encoding technology is used z Main Application Areas 1 AMR Automatic Meter Reading 2 Wireless alarm and security systems 3 Wireless POS PDA 4 Long distance non contact RF smart...

Page 2: ...N NINGBO TELE PHONE 0574 88046201 FAX 0574 88046202 z Main Technical Specifications RF channels 433 050MHz modulation mode GFSK baud rate 9600bps output power 10mW Interface data format UART 8E1 8N1 data format Power supply DC 3 6V 5V overall dimensions 70 X 45 X 17 mm Figure2 interface and sizes ...

Page 3: ...s communication channel setting RF MCU TTL to USB Antenna USB USB A B PC RF MCU TTL to USB Antenna USB USB RS 422 equipment RS 422 equipment RS422 RS422 RS422 RS422 RS422 RS422 Figure3 ZF01 C wireless communication application diagram z Channel setting There is one group of 5 bit short circuiter wire JP2 as shown in Figure 2 defined as A B C D E respectively A and B are used for setting channels s...

Page 4: ...ipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equi...

Reviews: