15
click!
1
9
4
12
8
2
10
5
13
3
11
6
14
7
More freedom. More confidence. With mylife
™
.
Preparation
Blood glucose measurement
Insert the test strip. The
meter starts automatically.
Apply blood vertically.
Wait until the symbol “Apply
blood” appears.
Data will be transmitted to the
mylife
™
App automatically
(Bluetooth
®
must be turned
on and the meter paired).
Wash and dry hands.
Take off the end cap by turning
both parts smoothly in opposite
directions.
Insert the lancet.
Prime the lancing device by
pulling the sliding barrel.
Put the device cap back on.
Set the puncture depth.
A total of 9 depths are available. 1 for soft or thin skin; 3 for
average skin; 5 for thick or calloused skin. Finer adjustments can
be made by using the grid between 1, 3 and 5.
Twist off the protective lancet
cap and put it aside.
Take the test strip out of the
vial and close the vial.
Obtain a blood sample by
pricking your finger.
You can choose between the pre-meal marker (which is
flashing by default), a post-meal marker , a fasting marker
or no marker.
