TIME RELAY PCM-02/24V
INSTRUCTION MANUAL
Zakład Mechaniki i Elektroniki
ZAMEL
sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamelcet.com
, e-mail: marketing@zamel.pl
VER. 002_01.04.2010
The device is designed for
one-phase installation and
must be installed in accor
-
dance with standards valid
in a particular country. The
device should be connec
-
ted according to the details
included in this operating manual. Installa
-
tion, connection and control should be car
-
ried out by a qualified electrician staff, who
act in accordance with the service manual
and the device functions. Disassembling of
the device is equal with a loss of guarantee
and can cause electric shock. Before in
-
stallation make sure the connection cables
are not under voltage. The cruciform head
screwdriver 3,5 mm should be used to in
-
stal the device. Improper transport, storage,
and use of the device influence its wrong
functioning. It is not advisable to instal the
device in the following cases: if any device
part is missing or the device is damaged or
deformed. In case of improper functioning
of the device contact the producer.
CAUTION
APPEARANCE
FEATURES
TECHNICAL PARAMETERS
DESCRIPTION
● Operating mode: switch off delay (in
-
put voltage release),
● supply voltage control indicator - LED
green,
● power/relay supply indicator and time
measure - LED red,
● time measure accuracy,
● wide time adjustment range,
● constant switch on, switch off func
-
tion,
● relay output - 1 change-over contact
(NO/NC) contact max 16 A capacity,
● TH 35 DIN rail installation.
The one mode time relay PCM-02/24V
has a delayed switch off function (aver
-
sive) in automation and control systems.
The relay is released by power supply
voltage. It has a wide time adjustment
range from 0,1 s to 10 days. Additio
-
nal ON/OFF functions enable constant
switch on, switch off of the output (load).
The system has the indicators of power
supply voltage, relay mode, and time me
-
asure with the help of red LED diode.
PCM-02/24V
Input (supply) terminals:
-/~ , +/~
Rated voltage:
24V AC/DC
Input voltage tolerance: -5%, +10 %
Supply voltage control indicator: green LED diode
Nominal frequency: 50 / 60 Hz
Rated power consumption: 36 mA
Operating mode number: 1 (switch off delay)
Time adjustment range t: from 0,1 s to 10 days
Time measure accuracy: 0,2 %
Time adjustment: 2x potentiometer ( step)
Output relay optical signalization: red LED diode
Output relay parameters: 1NO/NC - 16 A / 250 V AC1 4000 VA
Number of terminal clamps: 5
Section of connecting cables: from 0,2 to 2,50 mm
2
Ambient temperature range: from -20 to +60
o
C
Operating position: free
Mounting: TH 35 rail (EN 60715)
Protection degree: IP20 (EN 60529)
Protection class:
II
Overvoltage category:
II
Pollution degree:
2
Rated impulse withstand voltage: 2 kV (EN 61000-4-5)
Dimensions (height / width / depth): monomodular (17,5 mm) 90x17,5x66 mm
Weight: 0,09 kg
Reference standards: EN 60730-1
EN 60730-2-7
EN 61000-4-2,3,4,5,6,11
Ou
t
pu
t
(l
o
ad
)
rela
y
t
ermi
n
als
Suppl
y
v
o
l
t
a
g
e
cont
r
o
l i
n
di
c
a
to
r
I
n
pu
t
suppl
y
t
ermi
n
al (-/~
)
I
n
pu
t
suppl
y
t
ermi
n
al (+/~
)
Sm
oot
h
t
ime adjus
t
me
nt
P
ow
er/rela
y
suppl
y
i
n
di
c
a
to
r
Time adjus
t
me
nt
c
h
o
i
c
e
The symbol stands for selective
collection of electrical
and electronic devices.
Placing used devices with other
waste is not allowed
