Product must be lit 30 minutes before closing it.
Do not put device in contact with aggressive
chemical substances, such as fertilizers, etc.
R
outdoor
Installation Instruction
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
Page 1 of 6
900 Micro
Safety and warnings for installation:
•
Installation and start-up must be carried out by qualified personnel only.
•
Carry out operations on device only with device disconnected from power supply.
•
Connect to mains following the installation regulations in force.
•
Do not remove power cable.
•
The external fexible cable of this device cannot be replaced; if damaged, the device must be destroyed.
•
Connection to the mains must be performed with certifed screw connectors, 120V, 3 x 2.5 mm
2
,
3 x 1.5 mm
2
, 2 x 2.5 mm
2
or 2 x 1.5 mm
2
, in branch box with protection level IP 68.
•
Replace gasket at every lamp change.
8
max. 30
