ZEK-HDMI2-SP2
QUICK SETUP GUIDE
B
A
C
INITIAL SETUP
1
CONNECT INPUT DEVICE
Using the ‘HDMI Input’ port
A
, connect to the
source device (i.e Blu-Ray player) using a HDMI
cable
(not supplied).
2
CONNECT OUTPUT DEVICES
Using the ‘HDMI Output’ ports
B
, connect your sink
device (i.e TV) using a HDMI cable (not supplied).
3
CONNECT POWER
Use the supplied power supply, connect to the DC
5V port
C
. Ensure the sink devices are powered on
before powering on the splitter.
Please note:
Certain sources will only read the
EDID once, so if you are not getting the correct
resolution, please try rebooting the source device.
Zektor US, Inc
12635 Danielson Court, Suites 201/202/203,
Poway, CA, 92064
sales@zektor.com | (858) 748-8250
www.zektor.com
DC 5V
INPU
T
HDMI UHD 18Gbps
1 -2 HDMI SPLITTER
OUTPUT 1
OUTPUT 2
