background image

MOUNTING 

INSTRUCTIONS

ZE-RVC45DT

REAR VIEW CAMERA

KEY FEATURES

•  Compact 45° universal rear view camera 
•  System design for easy mounting with deployment as front- or rear-view camera  
•  Detailed high contrast picture suited for twilight conditions
•  Separable 3-part system cable, with cable parts of 0.7 m + 7.0 m + 0.7 m length 
• Normal or mirror image picture output selectable
•  Aluminum die-cast housing with M6 threaded tube

DESCRIPTION:

The ZENEC ZE-RVC45DT rear view camera model was developed for universal use, allowing retrofitting of a great variety of 
vehicles due to its extremely compact housing shape. The picture can be outputted as normal or mirror image, for mounting and 
utilization of this model as front- or as rear view camera. Besides, the ZE-RVC45DT offers a large horizontal viewing angle of 140° 
for good overview.

This product is compatible with a wide variety of 2-DIN A/V receivers of the aftermarket and the ZENEC E>GO product line up, 
including ZENEC 2-DIN infotainers and naviceivers.

ZENEC ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland

 

 

CAUTION:

  

Use the included connection cable exclusively. Altering or replacing it will void your warranty.

  

The camera is water- and dustproof and has been licensed according to the international standard IP69K. However, 
vehicle cleaning using high pressure water and steam jet devices may still lead to damage of IP69K rated camera 
models by water intrusion. Keep a distance of at least one meter between the water nozzle and the camera housing.

Rev. B

EU Legal Representative: 
ACR S & V GmbH ∙ Industriestraße 35 ∙ D-79787 Lauchringen ∙ Germany

EN

 Technical Specifications

:

Image device: 

¼” / 6.4 mm Aptina ASX340AT CMOS sensor

Lens focal length: 

f1.5

TV system: 

NTSC / 60 fps

View angle: 

180°(D) x 140°(H) x 90°(V)

Native sensor resolution: 

680 (H) x 512 (V) pixels

Resolution of video-out: 

> 420 TV lines

Frame rate: 

60 fi elds/sec.

Signal to noise ratio: 

> 48 dB

Light sensitivity: 

0.5 Lux/F1.2/50IRE 

Video output: 

1.0 Vp-p, 75 ohms CVBS

White balance: 

Auto

Backlight compensation: 

Auto

Gamma correction: 

0.45

Gain control: 

Auto

Sync system: 

Auto

Power supply: 

DC 6 - 16V 

Current consumption: 

60mA (DC12V) / ≤ 720mW

IP protection rating: 

IP69K

Operating temperature: 

-30°C~+75°C

DE

 Technische Spezifikationen

 

Kamerasystem: 

¼” / 6,4 mm Aptina ASX340AT CMOS Sensor

Brennweite Linse: 

f1.5

TV System: 

NTSC / 60 fps

Betrachtungswinkel: 

180°(D) x 140°(H) x 90°(V) 

Native Sensor Aufl ösung: 

680 (H) x 512 (V) Pixel

Aufl ösung Ausgangssignal:

> 420 TV Linien

Bildwiederholrate: 

60 Felder/Sek.

Signal/Rauschabstand: 

> 48 dB

Lichtempfi ndlichkeit: 

0.5 Lux/F1.2/50IRE 

Video Ausgang: 

1,0 Vp-p, 75 Ohm CVBS

Weißabgleich: 

Automatisch 

Belichtungskompensation:

Auto

Gamma Korrektur: 

0.45 

Helligkeitsabgleich: 

Automatisch

Synchronisation: 

Automatisch

Spannungsversorgung: 

DC 6 - 16V 

Stromverbrauch: 

60mA (DC12V) / ≤ 720mW

Schutzklasse: 

IP69K

Betriebstemperatur: 

-30°C~+75°C

Video Out
(connect to Moni-/Naviceiver)

Red: CAMERA PWR (+12V)       

7.0 m

0.7 m

0.7 m

Black: GND 

     

Rear camera mode: Green cable open
Front camera mode: Green cable twisted

M6 Nylon nut*

* Torque 20Nm

2A fuse

Reviews: