Due to its compact size the ZE-RVC80MT MKII rear view camera
is suitable to be installed at the upper edge of the license plate
or below the rear bumper, depending on car model or customer
preferences. The connection cable of the camera can often be
routed alongside the license plate illumination wires – allowing for a
quick and trouble free installation process. The high quality CMOS
camera sensor also offers an extended temperature operating
range, a waterproof lens assembly (IP68) and housing, made of
durable die cast aluminium.
Yellow: Video Out
Black: GND
Red: ACC
(connect to Moni-/Naviceiver)
Camera rotates
Green: Cable unconnected causes mirror image.
Cable connected to GND yields normal image.
Yellow: B12VDC
ZE-RVC80MT MKII
ZE-RVC80MT MKII
MOUNTING INSTRUCTIONS
REAR VIEW CAMERA
REAR VIEW CAMERA
Rotatable Reverse Camera
Form an „S“ shape with the cable
before you pull the cylinder out of the
bracket. Drill a mounting hole and fix the
bracket in place.
Cylinder
Wire
Insert the cylinder into the bracket.
Attach the side cap piece.
Rotate the cylinder into desired view
angle. Tighten the screw.
Uncrew ths side cap. Cable goes
through the hole in the bracket and
remains invisible after the installation
is completed.
CAUTION:
*
Following the latest trend in vehicle electronics, newer cars
mainly use a pulse width modulated power feed for outer
hull lights, which is unsuitable for imaging/video electronics,
as it causes considerable picture distortion.
*
Use the included connection cable exclusively. Altering or
replacing it will void your warranty.
ZENEC by ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland
EU Legal Representative:
ACR S & V GmbH ∙ Industriestr. 35 ∙ D-79787 Lauchringen ∙ Germany
www.zenec.com
R
ev.
G
Technical Specifications
Image device:
0.25" CMOS Sensor
TV system:
NTSC
Viewing angle:
140° horizontal
Sensor resolution:
720 x 480 pixels
Resolution of video-out: 480 TV lines
Minimum illumination:
0.3 lux
Video output:
1 Vp-p, 75 ohms
White balance:
Auto
Power supply:
DC 12 Volt typ.
Current consumption:
60 mA max.
IP protection rating:
IP68 water and dust protected
Operating temperature:
-30°C to +75°C
