ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126
Telephone: 408.558.8500 • Fax: 408.558.8300 •
www.ZiLOG.com
Introduction
Thank you for purchasing the ZiLOG Opto-Isolated USB Smart Cable (Figure 1). The
opto-isolated USB Smart Cable lets you connect your target Z8 Encore!
®
or Z8 Encore!
MC™ development board to a high-speed or full-speed USB port on your ZiLOG Devel-
oper Studio II (ZDSII) host system. Its internal optoisolator electrically isolates the devel-
opment kit circuitry from the USB Smart Cable.
This User Manual tells you how to install the USB Smart Cable for the first time and load
the necessary driver software. After connecting the USB Smart Cable and installing the
driver, you can proceed with debugging as described in your development kit documenta-
tion.
Figure 1. Opto-Isolated USB Smart Cable
Kit Contents
•
USB Smart Cable
•
USB cable, Type A to Type B
•
Six-conductor ribbon cable
•
User Manual
Opto-Isolated USB Smart
Cable
User Manual
UM019502-0606
electronic components distributor
