background image

Check Box for These Contents 

In the event of missing or defective parts please call our customer service department at 

1 877 234 6196 

(Mon. to Fri. 8:00 AM to 4:00 PM EST)

.

    1.  

Post Cap

 (5)

 

    2. 

 Mailbox Post 

(1) - 3” x 3” x 54”

    3. 

 Post Arm 

(1) - 4” x 4” x 23” 

 

    4. 

 Board Wall - Rear 

(2) 7/8“ x 11” x 6 1/2“

    5. 

 Board Wall - Sides 

(2) 7/8“ x 11” x 14“

    6. 

 Board Wall - Front 

(1) 7/8“ x 11” x 14“

    7. 

 Planter Box Post 

(4) 3“ x 3” x 12 1/4“

    8. 

 Planter Box Brace 

(1) 7/8“ x 1 1/2” x 14 3/4“

    9. 

 Anchor Pipe 

(1) 36 5/8” Long

 10. 

 5/8” Tek Screw 

(2)

 11. 

 3” Self-Augering Stainless Steel Screw 

(4)

 12. 

 1/4”  Hardened Steel Drill Bit 

(1)

    

Tools You Will Need

    •  Cordless Drill
    •  Level
    •  Sledge Hammer 

General Information

    • 

 Read Instructions through carefully before beginning assembly.

    •  When assembling components, place on a non-abrasive surface

         (i.e. shipping box) 

to avoid scratching. 

    •  We recommend an area approx 5’x 8’ for unobstructed assembling.
    •  You should not need to use excessive force when assembling components.

Majestic Mailbox Kit with Planter Box

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

1

10

Not to Scale

Ver 1.1/110617

8

2

1

3

7

Ground

*

* Mailbox and mounting hardware for

the mailbox not included

DO-IT-YOURSELF 

FRIENDLY PRODUCTS

Zippity

9

11

18 in

18 in

12 

1/4 

in

12 

7/8 

in

42 

in

54 

5/8 

in

19 in

2 1/4 in

11 

in

18 

in

18 

5/8 

in

12

4

5

6

Summary of Contents for Majestic Mailbox Kit with Planter Box







Reviews: