background image

Make sure that your NVR is powered off and unplugged from the power 
source. Using a screwdriver, remove the four screws located on the 
bottom panel as shown below.

2

Hard Drive Disk Installation

If your system does not include a pre-installed hard drive (HDD), you can 
purchase your own and follow the steps below for installation. Make sure 
that you purchase a 3.5" HDD optimized for always-on read/write 
surveillance, e.g. 

low-powered WD10PURX

 HDD.

1

1

Getting to know your Business Security 
System

The Zmodo Business Security System provides a full-featured monitoring 
solution to cover your entire business space. The business system includes an 
NVR for local storage, HD cameras with cloud storage options, and sPoE 
Repeaters to connect the cameras. The sPoE repeater allows you to run one 
cable from your router to power on multiple cameras in each zone of your 
business. It will also allow for longer cable runs from your NVR. 

Network Requirements:
720p cameras: Requires at least 1mbps upload when live viewing or 2mbps 
upload when using the Cloud Service for each camera.
1080p cameras: Requires at least 2mbps upload when live viewing or 4mbps 
upload when using the Cloud Service for each camera.

In order to optimize bandwidth and the number of ports on your WiFi router, 
you may use a network switch, however your sPoE Repeater(s) and NVR must 
be connected to the same network. 

Smart Business Security System

Quick Start Guide

1

Summary of Contents for Smart Business Security System









Reviews: