background image

Zurn Industries, LLC

511 W. Freshwater Way, Milwaukee, WI U.S.A. 53204 · Ph. 1-855-ONE-ZURN, Fax 919-775-3541

In Canada

 

|

 

Zurn Industries Limited

7900 Goreway Drive Unit 10, Brampton, Ontario L6T5W6 · Ph. 905-405-8272, Fax 905-405-1292

www.zurn.com

Rev. A
Date: 3/26/2019
C.N. No. 

SAN008462

Prod. | Dwg. No.  

FV637

®

Cumberland Series™ 
Faucet

Sensor-Operated Lavatory Faucets for 
Battery or Plug-In Installations.

Installation, Operation, Maintenance, 
and Parts Manual

Patented and Patents Pending

Z6956-XL

Cumberland Series

Sensor-Operated Battery-Power or Plug-in 
Lavatory Faucets

NOTICE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.

NOTE: The information in this manual is subject to change at any time without notice. Installations may 
be performed at different times of construction by different individuals. For this reason, these instructions 
should be left on-site with the facility or maintenance manager.

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the 

date of purchase. Decorative fi nishes warranted for one year. We will replace at no costs goods that prove defective provided we are 

notifi ed in writing of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly 

maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages 

whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the 

defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the 

purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantabil-

ity is expressly excluded. If the products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to a 

period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are 

approximate and are not guaranteed.

WARNING

: Cancer and Reproduc  ve Harm - www.P65Warnings.ca.gov

ADVERTENCIA: 

Cáncer y daño reproduc  vo - www.P65Warnings.ca.gov

AVERTISSEMENT: 

Cancer et e

 ets néfastes sur la reproduc  on - www.P65Warnings.ca.gov

Summary of Contents for Cumberland Series







Reviews: