background image

LTE7480-S905 

4G LTE-A Outdoor Router

Copyright © 2019 Zyxel Communications Corp. All Rights Reserved.

See the User's Guide at www.zyxel.com for more information, 
including customer support and safety warnings.

Quick Start Guide

1/4

US Importer

Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com

1

2

RESET

SIM

L A N (P o E )

RESET

SIM

L A N (P o E )

Make sure the LTE7480 is turned off. There should be no Ethernet cable connected providing 
power using PoE. Unscrew the SIM card slot cover and remove it.

1

Insert your SIM card provided by an LTE ISP (Internet Service Provider).

       

2

Step 1    

SIM Card Installation

1

2

3

4

Follow steps 1 to 4 in the drawing to connect an 8-pin Cat 5e Ethernet cable to the LTE7480's 

LAN

 port.

1-4

Step 2    

Cable Connections

Cat 5e (not supplied)

Power Injector

Power Outlet

Pole Mounting

Cat 5e (not supplied)

Power Injector

Power Outlet

Wall Mounting

Location Examples

Gateway

Laptop

Smartphone

PC

Place the LTE7480 in an open area 
free of obstacles, and adjust the angle 
to point it towards the base station to 
have the strongest possible LTE signal.

Package Contents

LTE7480-S905

Gigabit

PoE Injector

GbE

Cable

Cable

Gland

Grounding

Wire

Power

Cord 

Quick Start 

Guide

Safety

Warnings

Hex Nuts

M6 Spring 

Washers

Tapping Screw

M4x25 mm

Nylon Wall

Plugs

M6 Hex

Bolts x90L

x4

x4

x4

x4

x4

M6 Hex

Bolts x12L

Flat Brackets

x2

M Bracket

Pre-assembled Kit

x4

x4

M6 Washers

Mounting Kit

Summary of Contents for LTE7480-S905

Page 1: ...SIM Card Installation 1 2 3 4 Follow steps 1 to 4 in the drawing to connect an 8 pin Cat 5e Ethernet cable to the LTE7480 s LAN port 1 4 Step 2 Cable Connections Cat 5e not supplied Power Injector Power Outlet Pole Mounting Cat 5e not supplied Power Injector Power Outlet Wall Mounting Location Examples Gateway Laptop Smartphone PC Place the LTE7480 in an open area free of obstacles and adjust the ...

Page 2: ...Fi Remove the label from the back of the LTE7480 and put it on the injector Connect to the LTE7480 WiFi network using the WIFI SSID and WIFI Key on the injector label or on your smartphone simply scan the QR code to connect 1 2 You can download the LTE Ally app or use the web configurator see next to manage the LTE7480 Screw the SIM card slot cover back into place 3 Scan the QR code on the device ...

Page 3: ... Washers x4 x4 Four M6 Spring Washers Four M6 Hex Bolts x12 L One M Bracket x4 x1 C D E F B D 3 4 C E F Secure the M bracket to the wall 3 4 Secure the LTE7480 to the M bracket B Four M6 Washers x4 A x4 Four M6 Spring Washers C x4 Four Hex Nuts A B C Step 5 Pole Wall Mounting Connect Pre assembled Bracket Make sure the LTE7480 is turned off Disconnect the PoE injector from the power outlet Use A B...

Page 4: ...accessories to the device make sure to connect the cables to the correct ports Do not open the device opening or removing covers can expose you to dangerous high voltage points or other risks Please contact your vendor for further information Place connecting cables carefully so that no one will step on them or stumble over them and disconnect all cables from this device before servicing or disass...

Reviews: