Industrial Tracker Reference Guide FW 1.8 V0.2
6.7 Actvity status messages
6.7.1
Actvity operatng mode
When the operaton mode is actvity, the actvity status reportng has the folloting format:
Common header
Data
Byte 0i4
Byte 5
Byte 6i9
Header tith Type=0x07
0x01
Actvity
Actvity:
Actvity counter.
Unsigned 32 bits value in big endian format (MSB frst).
6.7.2
Side operatng mode
When the actvity is requested via the side operatng mode (
periodic_actiiitt_period
parameter not
null) the status has the folloting format:
Common header
Data
Byte 0i4
Byte 5
Byte
6i7
Byte
8i9
Byte
10i11
Byte
12i13
Byte
14i15
Byte
16i17
Byte
18i21
Header tith
Type=0x07
0x04
Windot
1
Windot
2
Windot
3
Windot
4
Windot
5
Windot
6
Global
counter
Window x
: value containing the actvity counter during the x
th
tme tindot. The tindot 6 is the
most recent one and the tindot 1 is the oldest
Global counter:
Global actvity counter, it contains the actvity since the beginning.
6.8 Configuraton messages
This message reports the parameter values confgured in the trackers. If the complete list is
requested, several UL messages till be transmited.
Common header
Data
Byte 0i4
Byte 5
Byte 6i10
Byte 11i15
Byte 16i20
Byte 21i25
Byte 26i30
Header tith
Type=0x07
0x02
Parameter
1
Parameter
2
Parameter
3
Parameter
4
Parameter
5
Parameter x:
Confguraton of the parameter
x
, coded on 5 bytes as follot:
Parameter x
Byte (5*
x
+1)
Byte (5*
x
+2) i (5*
x
+5)
Parameter ID
Parameter value
Parameter ID
: Refer to the parameter identfer in the secton
Parameter value
: Unsigned 32 bits value in big endian format (MSB frst).
Page 27 of 46
10th July 2019
Restricted distribution