Agilent E5270 TIS User’s Guide, Edition 1
2-15
TIS Function Reference
disable_port
disable_port
This function sets the specified channel to the zero output state as shown in Table
2-7.
Synopsis
int disable_port(port)
int port;
Arguments
Example
int err;
err=disable_port(0);
See Also
•
Table 2-7
Zero Output State
Item Range
Restrictions/Description
port
Specify channel to be set to the zero output state by using the port
address or a pin number that is assigned to the port by the
connect_pin function. Available
port
values are 0 to 49, SMU1 to
SMU8, or values shown in Table 2-2 on page 2-9.
port=
0 sets all ports to the zero output state.
Setup Item
Setting Value
Output Mode
Voltage output
Output Range
No change or 20 V if SMU was in I source mode.
Output Voltage
0 V
Current Compliance
100
m
A
