10
Commands
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Command
Parameters
Description
WP_DisplaySet[a,b,c,d]$
WP_DisplaySet[?]$
[a]
baud rate: 2400 , 9600 , 19200 , 38400 ,
56000 , 57600 , 115200
[b]
data bit: 5 , 6 , 7 , 8
[c]
parity: N (None) , O (Odd) , E (Even) , M
(Mark) , S (Space)
[d]
stop bit: 1 , 1.5 , 2
Set projector’s RS-232 port
WP_DisplayOn[a,b]$
WP_DisplayOn[?]$
[a]
command length.
carriage return is computed, if it has one.
Max. command length is 50
[b]
command string.
Include carriage return, if it has one.
Supports multi-command in a command string.
Supports delay-command COMMA
(a comma=5 sec)
Set projector’s Display On command
WP_DisplayOff[a,b]$
WP_DisplayOff[?]$
[a]
command length.
carriage return is computed, if it has one.
Max. command length is 50
[b]
command string.
Include carriage return, if it has one
Supports multi-command in a command string.
Supports delay-command COMMA
(a comma=5 sec)
Set projector’s Display Off command
WP_IdentifyTx[a]$
[a]
?
Identify Tx model; reply TX=AT-HDVS-
TX, TXWP=AT-HDVS-TX-WP
WP_Input[a]$
[a]
? , Hdmi1 , Hdmi2 , Vga
Select input source
WP_Input[a]$
[a]
? , Hdmi , Vga
Select input source
WP_Display[a]$
[a]
? , On , Off
Display On/Off control
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
