ARP table
Issue 1 January 2008
171
clear arp-cache
Use the
clear arp-cache
command to delete all dynamic entries from the ARP cache.
Syntax
clear arp-cache [
interface
|
vlan_id
|
ip_address
[
mask
]]
Parameters
User Level
read-write
Context
general
Example
To flush all ARP entries:
G450-001(super)# clear arp-cache
Flushing all arp entries
Flushed 22 ARP entries.
To flush ARP entries for an interface named FastEthernet 10/2:
G450-001(super)# clear arp-cache "fastethernet 10/2"
Flushing ARP cache entries on ifName fastethernet 10/2
Flushed 1 ARP entries.
To flush ARP entries for one host address:
G450-001(super)# clear arp-cache 156.16.11.32
Flushing ARP cache entry of host 156.16.11.32
Flushed 0 ARP entries.
Parameter
Description
Possible
Values
Default
Value
interface
The interface name for which to delete
entries
vlan_id
The VLAN ID for which to delete entries
1-4090
ip_address
The host IP address to clear
mask
The IP mask of the subnet to clear
Summary of Contents for G450 Manager
