Programming
KL6581 and KL6583
33
Version: 2.0.0
Register page 2
Register no.
Comment
Default value
R/W Memory
EnOcean ID of the KL6583 with CAN address 1
variable variable R
RAM
...
...
...
...
...
...
EnOcean ID of the KL6583 with CAN address 8
variable variable R
RAM
Firmware version of the KL6583 with CAN address 1
variable variable R
RAM
...
...
...
...
...
...
Firmware version of the KL6583 with CAN address 8
variable variable R
RAM
Status of the KL6583 with CAN address 1
variable variable -
RAM
...
...
...
...
...
...
Status of the KL6583 with CAN address 8
variable variable -
RAM
5.2.5
Register description
The registers are used to parameterize the terminal. They can be read or written by means of register
communication.
R4: Register page selection (read/write)
The KL6581-0000 has two register pages via which registers 32 to 63 can be addressed.
Using register 4, select which register page 32 to 63 is to be shown. Valid values:
0: Register page 1
1: Register page 2
R8: Terminal type
Register R8 contains the ID for the terminal module.
KL6581-0000: 0x19B5 (6581
dec
)
R9: Firmware version
Register R9 contains the firmware version of the terminal, e.g.
0xB100 = 'B1'
.
This value cannot be changed.
R31: Code word register
• If you write values into the user registers without first entering the user code word (0x1235) into the
code word register, the terminal will not accept the supplied data.
• If you write values into the user registers and have previously entered the user code word (0x1235) in
the code word register, these values are stored in the RAM registers and in the SEEPROM registers
and are therefore retained if the terminal is restarted.
The code word is reset if the terminal is restarted.
Register page 1
R32: KL6583 found modules (read only)
If the bit is set, then a corresponding module has been found.
Example:
0x0001 only one module with CAN address 1 found.
0x0005 two modules with CAN address 1 and 3 found.
0x00FF eight KL6583 found from address 1 to 8
Summary of Contents for KL6581
Page 2: ......
Page 4: ...Table of contents KL6581 and KL6583 4 Version 2 0 0...
