Host Commands
Polycold Cryochiller
System Configuration Commands
Installation and Operation Manual
Brooks Automation
7-12
214072 Revision B
PROFIBUS_PARAMS Profibus parameters
HMI_TIMEOUT HMI Timeout
Purpose:
Bet the profibus speed and Get/Set Profibus
Parameter(s):
SPEED,? or ,ADDRESS,? or ,ADDRESS,[address]
[speed] is READ ONLY
-
0 = 9.6k
-
1 = 19.2k
-
2 = 45.45k
-
3 = 93.75k
-
4 = 187.5k
-
5 = 500k
-
6 = 1.5M
-
7 = 3M
-
8 = 6M
-
9 = 12M
[address] is 1 - 125.
Return Value:
[A] or [A][speed] or [A][address]
Default Value:
[speed] = 0 [address] = 7
Min: [speed] = 0 Read Only
[address] = 1
Max: [speed] = 9 Read Only
[address] = 125
Security Level
Get: 1
Set: 3
Example:
“PROFIBUS_PARAMS,SPEED,?” Get the Profibus speed
Interface
RS-232, Ethernet
Purpose:
Get/Set the timeout of the HMI menu to previous menu
Parameter(s):
? or [nnnn]
[nnnn] is HMI timeout in seconds
Return Value:
[A] or [A][nnnn]
Default Value:
300
Min: 30
Max: 1800
Security Level:
Get: 1
Set: 3
Example:
“HMI_TIMEOUT,?” get the current HMI timeout setting
Interface
RS-232, Ethernet