Appendix A. EC150 Settings
A-10
executed. If reading a setting,
0
in the result code means that the value in the
DestSource
variable is the value the desired setting has in the EC150. When
writing a setting, if the result code is
0
, the value and setting were compatible,
but the value was not changed because it contained the same value that was
sent. A return code of
1
from the set operation means that the value was valid,
different, set and acknowledged. This allows
CRBasic
code to control whether
or not to save the settings.
NAN
(not a number) indicates that the setting was
not changed or acknowledged or a signature failure occurred.
SDMAddress
defines the address of the EC150 to configure. Valid SDM
addresses are 0 through 14. Address 15 is reserved for the
SDMTrigger()
instruction.
ConfigCmd
is a variable that indicates whether to get or set a setting. The
options are listed in TABLE
DestSource
is a variable that will contain the value to read when getting a
setting, or that will contain the value to send when writing a setting to the
EC150.
TABLE A-2. ConfigCmd Values for Setting and Retrieving Settings
ConfigCmd Variable
Setting Description (some settings list possible
values for the DestSource variable)
Set
Retrieve
0
100
Bandwidth:
•
5 = 5 Hz
•
10 = 10 Hz
•
12 = 12.5 Hz
•
20 = 20 Hz
•
25 = 25 Hz
1
101
Unprompted Output:
•
10 = 10 Hz
•
25 = 25 Hz
•
50 = 50 Hz
2
102
Pressure Sensor:
•
0 = EC100 Basic
•
1 = User-supplied
•
2 = EC100 Enhanced
•
3 = None (use fixed value)
3
103
Differential Pressure:
•
0 = Disable
•
1 = Enable
4
104
Fixed Pressure Value
5
105
Pressure Offset
6
106
Pressure Gain
Summary of Contents for EC150
