A-16
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Appendix A MML User Interface and Command Reference
prov-ed
prov-ed
The
prov-ed
command modifies a provisioned component.
prov-ed:name=
MML name
,
param name
=
param value
,...
Note
Enter only those parameters that must be modified.
Syntax Description
Usage Guidelines
To change more than one parameter, enter additional
param name=value
descriptions on the command
line. See
Chapter 3, “Provisioning the Cisco HSI,”
for a list of MML names, parameter names, and their
associated values.
Examples
Use the MML command shown in the following example to edit a provisioning element with the MML
name ras, parameter name maxFail, and value 7:
gw mml>
prov-ed:name=ras,maxfail=7
H323 Signaling Interface Sun Jan 7 15:22:02 2001
M SUCC
Successfully edited provisioning element(s):
MML Name : ras.
Parameter: maxFail.
Value : 7.
prov-rtrv
Retrieves information about an existing provisioning session.
prov-sta
Establishes a provisioning session.
prov-stp
Terminates either a specified provisioning session or the current
provisioning session.
Command
Description
MML name
MML name for the element you are modifying. Valid MML names are:
•
sys_config_static
•
sys_config_dynamic
•
h323_sys
•
ras
•
h245
•
q931
param name
The name of a valid configuration parameter for the specified name.
param value
The value you want to assign to the parameter.
