S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-123
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
mpls strip
mpls strip
To enable the MPLS stripping feature globally, use the
mpls strip
command. To disable this feature, use
the
no
form of this command.
mpls strip
no mpls strip
Syntax Description
This command has no arguments or keywords
Command Default
Disabled
Command Modes
Global configuration mode
Command History
Examples
This example shows how to enable MPLS stripping:
switch#
configure terminal
switch(config)#
mpls strip
switch(config)#
This example shows how to disable MPLS stripping:
switch#
configure terminal
switch(config)#
no mpls strip
switch(config)#
Related Commands
Release
Modification
6.0(2)U2(5)
This command was introduced.
Command
Description
mpls strip label
Adds or deletes static MPLS labels.
clear mpls strip label
dynamic
Clears dynamic label entries.
mpls strip label-age
Configures MPLS label aging.
mpls strip dest-mac
Configures the destination MAC address for stripped egress frames.
show mpls strip labels
Displays MPLS label configuration.