11
user can send SMS“move+pspace+0200” to the tracker (Suppose area of a
radius of 200 meters, it supports 4 digits at most. Unit: Meter). It will reply “move
OK”. In case of such a movement (the default distance is 200m), it will send SMS
“Move+ latitude & longitude” to the authorized numbers at 3 minutes interval.
7.14.2 Cancel: Send SMS “password” to deactivate the movement alarm.
7.15.
Over
speed
7.15.1 Set up: Send SMS: “speed+pspace+080” to the unit (suppose the speed is
80km/h), and it will reply “speed ok!”. When the target moves exceeding 80 km/h, the
unit will send SMS : “speed+080!+Geo-info” to the authorized numbers every 3
minutes.
7.15.2 Cancel: Send SMS “password” to deactivate the overspeed alarm.
Remark: The recommended speed should be not less than 50km/h. For below that rate,
it will be effected the accuracy by gps signals drift etc.
7.16.
Low battery alert
7.16.1 Send SMS “lowpspace+on”, it will send SMS “low
latitude/longitude” to authorized numbers 2 times in total in 15 minutes interval
when voltage of battery is going to be about 3.55V.
7.16.2 This function activates as default, send SMS “lowpspace+off” to
deactivate
7.17.Forward the third parties’ message
Send SMS "pspace+third parties phone number" from authorized
phone number, tracker will reply "forward ok", and supports 1 third parties phone
numbers at most.
For example, set the phone number of the service provider of the simcard in the tracker,
when charge remind message coming in, tracker will forward it to authorized phone
number.
Cancel: Send SMS command "nopassword".
7.18.SIM card Balance Inquiry
Function: Send SMS command “pspace+carrier’s phone
space+code" to tracker, it will forward the code to the carrier’s phone number
and return the message from the carrier’s phone number.
Take china mobile for example, china mobile is one of carrier in china, mobile
