Page | 24
ICC1-TC Tuner/Controller Product Manual 082020
Code
Function
Operation
Display Device Control Configuration
T2
Display Control Mode
"A5,<dh>,<dl>,3,'T2'<Mode> (7 bytes)
Sets the communication mode for display control
<Mode>
0=None
1=CEC
2=RS-232
3=IR
CE
CEC Control Mode
"$A5,<dh>,<dl>,3,'CE',<Mode>" (7 bytes)
Sets the HDMI CEC functions
<Mode>
0=None
1=Power On
2=Power On and Off
T0
RS-232 Display Type
"$A5,<dh>,<dl>,3,'T0',<Type>" (7 bytes)
Sets Display type for RS-232 control
Serial Communication
R5
Baud Rate
"$A5,<dh>,<dl>,3,'R5',<Baud>" (7 bytes)
Sets the RS-232 com port baud rate
<Baud>
0=1200
1=2400
2=4800
3=9600
4=19.2K
5=38.4K
6=115.2K
7=230.4K
UX
Send String
"$A5,<dh>,<dl>,2+string length,'UX',<String>" (variable bytes)
Sends an RS-232 string directly to the display
Example:
"$A5,1,183,8,'UX','mc',$00,$20,$AF,$0D"
Display 439, sends command in hex 6D 63 20 00 20 AF 0D.
This is the string for an LG TV to set the display to zoom mode.
ZW
Save
"$A5,<dh>,<dl>,2,'ZW'" (6 bytes)
Saves current channel and power status in NVRAM of the controller.
ZR
Restore
"$A5,<dh>,<dl>,2,'ZR'" (6 bytes)
Restores channel and power status previously saved in NVRAM of the controller.
