62
Appendix A: GenICam Commands
File Access Control Feature Descriptions
Display Name
Feature
Description
View
File Selector
FileSelector
Selects the file to access. The file types which are accessible are
device-dependent.
1.00
Beginner
All Firmware
Upload micro code, FPGA code &XML as a single file to the
camera which will execute on the next camera reboot cycle.
DFNC
User Set
Use UserSetSelector to specify which user set to access.
User PRNU
Use UserSetSelector to specify which user PRNU to access.
User FPN
Current PRNU
Use UserSetSelector to specify which user FPN to access.
Accesses the PRNU coefficients that are currently being used by
the camera (not necessarily saved).
CameraData
Download camera information and send for customer support.
File Operation
Selector
FileOperationSelector
Selects the target operation for the selected file in the device.
This operation is executed when the File Operation Execute
feature is called.
1.00
Guru
Open
Open
Select the Open operation - executed by FileOperationExecute.
Close
Close
Select the Close operation - executed by FileOperationExecute.
Read
Read
Select the Read operation - executed by FileOperationExecute.
Write
Write
Select the Write operation - executed by FileOperationExecute.
File Operation
Execute
FileOperationExecute
Executes the operation selected by File Operation Selector on
the selected file.
1.00
Guru
File Open Mode
FileOpenMode
Selects the access mode used to open a file on the device.
1.00
Guru
Read
Write
Read
Write
Select READ only open mode
Select WRITE only open mode
File Access
Buffer
FileAccessBuffer
Defines the intermediate access buffer that allows the exchange
of data between the device file storage and the application.
1.00
Guru
File Access
Offset
FileAccessOffset
Controls the mapping offset between the device file storage and
the file access buffer.
1.00
Guru
File Access
Length
FileAccessLength
Controls the mapping length between the device file storage and
the file access buffer.
1.00
Guru
File Operation
Status
FileOperationStatus
Displays the file operation execution status. (RO).
1.00
Guru
Success
Success
The last file operation has completed successfully.
Invalid Parameter
Write Protect
File Not Open
InvalidParameter
WriteProtect
FileNotOpen
An invalid parameter was passed to the last feature called.
Attempt to write to a read-only (factory) file.
The file has not been opened yet.
File Too Big
FileTooBig
The file is larger than expected.
File Invalid
FileInvalid
The last file operation has completed unsuccessfully because
the selected file is not present in this camera.
File Operation
Result
FileOperationResult
For Read or Write operations, the number of successfully
read/written bytes is returned. (RO)
1.00
Guru
File Size
FileSize
Represents the size of the selected file in bytes.
1.00
Guru
Summary of Contents for Linea HS Series
Page 5: ...The Linea HS Monochrome Cameras 5 DECLARATION OF CONFORMITY 73 DOCUMENT REVISION HISTORY 74...
Page 15: ...The Linea HS Monochrome Cameras 15 Figure 4 HL HM 16K30H 00 R Mechanical Drawing...
Page 26: ...26 Camera Performance and Features Figure 7 Image with incorrect scan direction...
Page 73: ...Declaration of Conformity 73 Declaration of Conformity...
