16
(4) Delete All Passcodes
The user inputs "# 71 # Administrator Passcode #" to delete all the added passcodes, including the passcode
generated by the App (the administrator passcode will not be deleted).
In this process, the user inputs "#71#", and the lock prompts "Please input administrator's passcode" by voice,
after that, the user inputs the administrator passcode and "#", when the verification is successful, the lock
prompts "Operation successful" by voice.
(5) Modifiy User Passcode
User inputs "# 10 # old passcode # new passcode # New passcode #" to modify the passcode.
In this process, after inputing #10#, the lock prompts Please input the original passcode" by voice, and then the
user inputs the passcode and presses "#". If the old passcode is wrong, the lock prompts "wrong passcode" by
voice, otherwise it prompts "Please input a new passcode" by voice. After the user inputs the new passcode, the
lock prompts "Please input again" by voice. And the user inputs the same new passcode again, if the modifhcation
is successful,the lock prompts "Operation successful" by voice, otherwise, it prompts "Operation failed" by voice.
(6) Modify Administrator Passcode (Default passcode :123456)
User inputs "# 12 # old passcode # new passcode # New passcode #" to modify the management passcode.
In this process, after inputing "#12#", the lock prompts Please input the original passcode" by voice, and then the
user inputs the passcode and presses "#" . If the original passcode is wrong, the lock prompts "Wrong passcode"
by voice,othe wise it prompts " Please input a new passcode " by voice. After the user inputs the new passcode,
the lock prompts "Please input again" by voice. And the user inputs the same new passcode again, if the
modification is successful, the lock prompts "Operation successful" by voice, otherwise,
it prompts "Operation failed" by voice.
(7) Open Passage Mode
When the passage mode is activated, the user can directly turn the handle and unlock the door without fingerprint,
passcode, IC card or Bluetooth.
After successfully unlocking with fingerprint, passcode, IC card or Bluetooth, immediately input "123#" within 5
seconds, before the lock is automatically turned off. The lock should prompt "operation successful" by voice.
Alternatively, activate Open Passage mode in the Dato Home App.
