Davicom DM336P, Operation Manual

                                                                    AT Command Set

Preliminary                                                   

18

Order No. DM336P-002-01

Version : DM336P-AT-P04

Message (MDM) packets.

#CID=2 Enables unformatted Caller ID reporting of

any CID packet received after the first
RING cycle including SDM, MDM, or call
waiting packet.

#CLS

Data, Fax or Voice Mode Selection.

#CLS? Returns the current setting of the #CLS.

#CLS=0* Selects data mode operation.
#CLS=2 Selects fax class 2 command operation.

#CLS=8 Selects voice mode operation.

#MDL?

Request Model Information.

#MFR?

Request Manufacturer Information.

#REV?

Request Revision Information.

#TL=XXXX   

Voice Playback Volume Control.

#TL=0 mute, means no volume.

#TL=1

-24db, low volume

#TL=2

-18db

#TL=3

-12db

#TL=4

-6db

#TL=5* -0db
#TL=6

+6db

#TL=7

+12db

#TL=8

+18db, high volume

#VBS

Bits Per Sample Selection.

#VBS? Returns the current setting of #VBS.

#VBS=1  Selects 8 bits PCM.
#VBS=2 Selects 2 bits per sample ADPCM.
#VBS=3 Selects 3 bits per sample ADPCM.

#VBS=4* Selects 4 bits per sample ADPCM.

#VBT

Beep Tone Timer.

#VBT? Returns the current setting of the #VBT

command.

#VBT=0 Disables the tone generation capability

#VBT=n Sets tone duration time in 100 msec. Where

n = 1-40. Default is 10.

#VCI?

Request Compression Method Information.

#VLS

Voice Line Selection.

#VLS?

Returns the current setting of the #VLS.

#VLS=0*

This command causes the telephone line
interface to be routed through the modem.

#VLS=1 This command causes the handset to be

routed through the modem.

#VLS=2 This command routes the speaker through