Star Network Modem
E70-DTU(433NW30-ETH)_User Manual
Chengdu Ebyte Electronic Technology Co., Ltd.
27
mode, reset or restart the modem
3. When writing this instruction, the serial debugging assistant must be set not to send new lines; writing other AT
commands must be set to send new lines.
2
AT+EXIT
Exit AT command mode
AT+EXIT
Parameter Description:
Null
Response:
Exit AT Mode
Example
：
AT+EXIT
Note: AT commands are invalid after exiting AT command mode
3
AT+HELP
Help command
AT+HELP
Parameter Description:
Null
Response:
All instructions and help information
Example
：
AT+HELP
4
AT+ RPCFG
Reading the operating parameters
AT+ RPCFG
Parameter Description:
Null
Response:
Return to the current operating parameters
Example
：
AT+ RPCFG
5
AT+ WMCFG
Setting /Querying working mode (reboot valid)
AT+ WMCFG =?
Description:
Gets working mode
Response
：
WMCFG
：
4
AT+ WMCFG =Value
Description:
Value:0~4
0,Coordinator;
1, Normal node;
2, Dormant Node;
3, Sleep mode;
4, (factory default), dial switch control
Example
：
AT+ WMCFG =4
Note: 1. After setting a new mode, it needs to be reset or power off and restart
6
AT+DINFO
Get facility information
AT+DINFO=ALLNODE
Description:
Query the short and long address of all node, and return by UART.
It works only when the device works in the coordinator mode
AT+DINFO=SELFS
Description:
Get short address and return by UART
AT+DINFO=SELFE
Description:
Get long address and return by UART
Example
：
AT+DINFO=SELFE
7
AT+ TFOCFG
Setting/Querying output format configuration (reboot valid)
AT+ TFOCFG=
？
Description:
Gets output format configuration
Response
：
TFOCFG:0
AT+ TFCFG=Value
Description:
Value
：
0~7
0
：
Output: valid data (transparent transmission)
）
1: Output: Valid Data +Long Address
2
：
Output: Valid Data +Short Address
