ZWP500
™
Z-Wave Production Programmer & Tester
www.ExpressControls.com
February 2018
Bringing
the Internet of Things (IoT) to Life
24
A terminal emulator program like
PuTTY
or minicom can be
used to interact with the PSoC directly for debug and testing
purposes. Note that this mode is meant only for debugging
purposes and is not meant to be the normal method of
communication. Python, C or other programming languages
are expected to manage the communication.
Setup the PuTTY session as shown here:
Make sure the “Implicit LF in every CR” is checked. Since
the PSoC ONLY sends CR, the LF is implicit. If this option is
not checked then all communication will overwrite on the first
line of the terminal emulator.
The “Local echo” should be set to “Force on” which makes it
easier to see what you have typed.
The “Local line editing” should be set to “Force on” to make
it possible to use the backspace character to correct typos
before pressing <ENTER>.
Type “?<ENTER>” to print a brief menu of available
commands and the current version of the PSoC firmware.
Python sample application
The ZWP500 has a sample application written in Python in the examples directory
– see the SensorPIR.py file for more
details.
TBD
References
Sigma document
SDS12467
- NVR Flash Page contents
Warrantee & Copyright
If within two (2) years from the date of purchase, this product fails due to a defect in material or workmanship, Express Controls LLC will repair or
replace it, as its sole option, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty
does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been
subject to unauthorized repair, opened or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the
product; (e) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (f) transit damage,
initial installation costs, removal costs, or reinstallation costs.
EXPRESS CONTROLS LLC WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST
ONLY AS CONTAINED IN THIE LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE.
SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATIONS OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along
with proof of purchase, postage prepaid to the authorized service center listed below. This warranty is made by: Express Controls
–
www.ExpressControls.com
. Please, be sure to package the product securely to avoid shipping damage.
Information in this document is subject to change without notice and does not represent a commitment on the part of the manufacturer. The software
described in this document is furnished under license agreement or nondisclosure agreement and may be used or copied only in accordance
with the terms of the agreement.
See the End User License Agreement (EULA) for more details. See the individual copyright notices within the files for
specific rights and confidentiality requirements.
COPYRIGHT 2018 Express Controls LLC NH USA - All Rights Reserved
