C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
-
V
ERSION
1.0.0
3.2.5.2
“Voice Call” command index
3.2.5.2.1
GSM.VoiceCall.Dial,<“
p_number
“> - Makes a GSM voice call
Command syntax
$PFAL,GSM.VoiceCall.Dial,<“
Examples
$PFAL,GSM.VoiceCall.Dial,”+4912345678”
Responses
E.g.
$number dialed
Command description
This command sets up an outgoing voice call.
Parameter Description
<“p_number“>
Wrapped in quotation marks (“ ”), it specifies the phone number for dialling. It
originates an outgoing voice call to the specified target phone number
. The phone number is in international format including the area
code, country code and phone number.
3.2.5.2.2
GSM.VoiceCall.Accept - Accepts an incoming voice call
Command syntax
$PFAL,GSM.VoiceCall.Accept
Examples
$PFAL,GSM.VoiceCall.Accept
Responses
E.g.
$call accepted
Command description
This command accepts an incoming voice call, which is usually detected from an
incoming ring event.
Parameter Description
None
3.2.5.2.3
GSM.VoiceCall.Hangup – Hangs up an active voice call
Command syntax
$PFAL,GSM.VoiceCall.Hangup
Examples
$PFAL,GSM.VoiceCall.Hangup
Responses
E.g.
$call finished
Command description
This command terminates an established call.
Parameter Description
None
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 103 of 271
